Decorative colored concrete can’t be treated like your basic garage floor — you can’t use the typical ammonia-, bleach- and also acid-based cleaners recommended for concrete — they will ruin the concrete’s wax and wax. When removing stains, then your goal is to be gentle but powerful on the first move. Soap is usually your very best bet, but several other household products, like baking soda and olive oil, are also powerful. Preserve the stain resistance of the floor by sealing and waxing annual to create a barrier between dust and also the concrete. For those who have polished concrete, skip the sealants and waxes; instead, have your floor re-polished every seven decades.
Cleaning Up Greasy Stains and Common Marks
Good news: Grease doesn’t sink too much into concrete, so it is possible to clean up grease stains with soap, water and a good scrubbing. This also works for most other marks, such as spilled marinara, tracked-in mud and scuff marks in moving furniture. If you are not certain what sort of stain or shade was used for your concrete flooring, stick to a neutral ground cleaning soap and distilled water. Mix according to package instructions and scrub with a soft-bristled brush until the stain lifts. If you are certain of the ground’s finish and routine, non-citrus, non-bleach dish soap is a feasible option, use that instead; just add a few drops to cool distilled water and bathe. Dish soap will lift grease more rapidly, but it is not secure for all flooring. When you are finished, rinse thoroughly with water, and buff the floor dry with a soft cloth.
Removing Stains From Rug Pads
Vinyl and synthetic mats prevent rugs from sliding across flooring, but they can leave behind a stain of their own. Moisture rife with airborne mineral deposits becomes trapped between the mat and the concrete, leaving a whitish stain on the ground. Remove the stain with a non-acidic calcium deposit cleaner, then rinse the ground, and swap out plastic mats for cotton or linen products. Since you can’t use acidic cleaners on colored concrete, you may still have a slight whitest residue left behind. But it is going to be not as noticeable than before and stay hidden by the rug.
Dissolving Sticky Messes
Store-bought oil-based degreasers are not safe for most decorative concrete flooring due to the addition of flammable solvents and citrus-based oils. But, you can create your own version at home and use it in order to eliminate any sticky stains, such as pine sap or chewing gum residue. Mix 2 parts baking soda with 2 part coconut oil; if you do not have coconut oil on hand, obvious cooking oil functions in a pinch. Scrape away as much of the stain as you can with a plastic putty knife or the edge of the old credit card and apply the stain remover. Rub it in a bit, wait about ten minutes, then buff it into the ground to eliminate the residue. Add more of the mixture if the stain proves scrape and consistent the plastic as needed. When you are done, rinse and dry the ground.
Accidentally cleaning flooring with acid-based products or spilling acidic foods and beverages on the ground can etch the concrete’s finish, leaving behind an unsightly stain. Unfortunately, this isn’t something that you can just clean up. Call the contractor who installed your floor or a local expert to remove the hurt and maybe refinish the vulnerable, uncolored concrete to match the surrounding region. Do not attempt to undertake this project on your own.