How to Lay Vinyl Tile on Top of Vinyl Tile

As some of the flooring might contain asbestos, some states, such as California, have stringent laws regarding old tile removal. To avoid the chance of health issues, in addition to hefty fines if the removal is not done properly, many homeowners choose to put flooring instead. Vinyl tiles are typically inches and include adhesive backing for easy installation. You can do it yourself to save money, if you’re trying to upgrade your home with vinyl tile. The tiles are available in a range of patterns and colors to coordinate with home decor.

Clean the old vinyl flooring by popping up any debris. Damp-mop the tiles. Fill in any holes, dents or cracks utilizing epoxy and putty knife.

Inspect the outer edges of the room for molding or any baseboard that you will need to remove when the new floor is installed on the old to allow for height adjustments. Check the corner of the baseboard or trimming for almost any caulking, and cut with a utility knife through it to separate the trim out of the wall.

Wedge the end of a pry bar between the baseboard and wall face beginning at one end of this wall functioning. Harness the back end of the pry bar with a hammer to wedge the instrument between the trim and wall face. Pry on the instrument gently to push at the trim away from the wallsocket. Use the end of a hammer to remove any leftover claws or the pry bar’s nail-pulling attribute .

Assess for almost any flooring trim or nosing which could possibly be used to distinct kinds of flooring material or split rooms. Find the fasteners that secure them and remove using the appropriate hand tool like a pry bar or screw driver. Place to the side to use together with the vinyl flooring.

Look at the tile flooring and determine if you have to update it due to tiles that are uneven or poorly placed or if you can follow exactly the same layout and butted edges. Lay a direct line out in this room’s middle, and check that it is with an measuring method.

Peel the protective paper in the back of the tile. Line the tile up to the new or old layout and place it gently. Check that the edges match up with the layout before pushing the tile down to adhere it to the ground. Continue using all the tile installation.

Cut tile to match when you encounter barriers by shifting it and measuring the area with a tape measure. Lay out and cut on the custom made piece utilizing construction paper or cardboard if you are not certain of the dimensions so that you don’t waste tiles.

Remove the fasteners that are old from the baseboard using the claw or simply by using pliers. Reinstall flooring and the wood baseboard trim using exactly the exact same type of fastening nails or screws. Apply a bead of caulking on top corner of the baseboards, and spread it with a hand tool that is special or with the tip of a finger to fill in any gaps. Wipe up any excess caulking using a moist rag.

See related