Directions for Refinishing a Stairway
An old wood stairs provides your house with a hint of sophistication, whilst it serves its main reason for enabling one to go involving the different narratives in the construction. The the conclusion of the stairs can disappear and be distressed-down due to area exposure and visitors to the sunlight penetrating your property. Refinishing the stairs allow it to be seem like new and can re-establish the luster of the wood.
Take away the carpeting runner, for those who have one installed on the stairs, taking out out tacks or the staples employed to set it up using a flathead screwdriver as well as a pair of pliers. Work the end of the screwdriver underneath the staple, pry upward it if it will not come out effortlessly, and pull it out.
The flooring in the region round the stairs with tarpaulins to protect it.
Open doorways and windows close to the stairs, and put a fan near-by while you strip the first finish to supply clean air.
Take away in the wood with rough- grit beginning with 60-grit — such as risers, the stair treads and hand-rails on an electric sander for big spaces. Use an orbital sander for spaces, including balusters. Take away by sanding by hand in areas the sanders cannot get. Wear safety goggles as well as a dust mask when when working with the sanders.
Wipe down the wood using a tack cloth and vacuum dirt from crevices using a damp vacuum.
Using a putty knife, used repair any holes or chips in the wood with wood putty. Allow it to harden and sand it smooth with fine-grit sandpaper, from 100 to 240-grit.
Duplicate Measure 5.
Brush stain on the stairs, starting with all balusters and the hand-rail. Work from your very best of the stairs to the underside. Put on the stain to the hand rail and balusters with strokes that are easy, covering about 6″ a T a time. Make use of a little brush to utilize stain to any intricately constructed areas of the balusters that the paint brush that is bigger can-not achieve. Wear a mask, security goggles and gloves when applying the stain.
Wipe a rag over the hand-rail and balusters to eliminate unneeded spot.
Stain to the stair treads and risers. When implementing the stain, go together with the grain of the wood. Wipe off any excessive stain using the rags. Let the spot to dry for the time set by producer.
Apply another layer of stain in the event that you would like the stairs to be dimmer.